¶ LICENSE
End User Licence Agreement of IVAO Pilot Software
¶ IMPORTANT INFORMATION
This installation Setup is only available and working for the following simulators:
- FSX
- FSX Steam
- P3D V1
- P3D V2
- P3D V3
- P3D V4
- P3D V5
¶ INSTALLING ALTITUDE FOR P3D/FSX/FSX Steam
Installation is very simple. Make sure your flight simulator is not running. Then unzip the downloaded setup file and run the setup program.
After clicking “Next”, the License Agreement window is shown. Make sure you read and comply with the License Agreement before selecting “I Agree”.
You are now asked where you would like to install Altitude on your computer. You can decide to keep the default path as shown in the image below, or you can type in the preferred path or select “Browse…” to choose it, then click on “Next” to proceed with the installation.
The next windows allows you to select in which simulator you want to install the software, and the different components that you can choose to install.
You now are almost finished with the installation, after choosing the components and the pilot core you can click “Install” to proceed.
During the installation, you will see a progress bar showing the files being installed, like in the image below.
After the installation is “completed”, the following window will appears, just click “Next”.
Now you need to reboot your computer, you can choose the way in the following window and then click on “Finish”.
NOTE: It's very important to reboot the computer to complete the installation.
Once the computer is restarted, the installation is now finished.
¶ AUTHOR
- VID 346148 - Creation
¶ COPYRIGHT
- This documentation is copyrighted as part of the intellectual property of the International Virtual Aviation Organisation.
¶ DISCLAIMER
- The content of this documentation is intended for aviation simulation only and must not be used for real aviation operations.